When the GST Council changes a rate, the first question at every counter is about a GST rate change on old stock: "I bought these bags at the old rate, so what do I charge now?" Building-material dealers faced exactly this on 22 September 2025, when cement moved from 28% to 18% under GST 2.0. The same logic applies to every future rate change.
This guide covers which rate goes on the bill, what happens to input tax credit (ITC) you already took, and how to treat advances and returns that cross the change date.
The basic rule: the rate follows the time of supply, not the purchase date
GST is charged on your sale. The rate that applies is the rate in force on the time of supply of that sale. When you bought the goods, and at what rate, does not matter.
So cement bought in August 2025 at 28% and sold on 25 September 2025 is billed at 18%. There is no "old stock rate" to carry forward.
At a normal counter, goods leave and the invoice is raised the same day, so the invoice date decides the rate. Complications start only when delivery, invoice and payment fall on different sides of the change date.
Section 14 of the CGST Act: the six rate-change scenarios
Section 14 of the CGST Act, 2017 is the special time-of-supply rule for rate changes. It looks at three events: when goods were supplied, when the invoice was issued, and when payment was received.
| Goods supplied | Invoice issued | Payment received | Time of supply | Rate |
|---|---|---|---|---|
| Before change | After | After | Earlier of invoice or payment | New |
| Before change | Before | After | Invoice date | Old |
| Before change | After | Before | Payment date | Old |
| After change | Before | After | Payment date | New |
| After change | Before | Before | Earlier of invoice or payment | Old |
| After change | After | Before | Invoice date | New |
An easy way to remember it: when two of the three events happen after the change, the new rate applies; when two happen before, the old rate applies.
The "date of receipt of payment" is the earlier of the date you enter it in your books and the date it is credited to your bank. A proviso adds a rule for all these cases: if the payment is credited to your bank more than four working days after the change, the bank credit date is used.
GST rate change on old stock: what happens to your ITC
This was the biggest worry for cement dealers in 2025. They had claimed ITC at 28% but could only charge 18% on sale.
The government's FAQ on the 2025 rate changes says ITC properly availed in the electronic credit ledger can be used to pay any output tax. So a rate cut does not by itself require you to reverse ITC on stock that stays taxable. Reversal applies where goods become exempt, which was not the case for cement, steel or most building materials.
Worked example: cement bought at 28%, sold at 18%
Prices below are examples only, not market rates.
| Step | Calculation | Amount |
|---|---|---|
| ITC on purchase (10 Sep 2025) | 400 bags × ₹300 × 28% | ₹33,600 |
| Output tax on sale (after 22 Sep 2025) | 400 bags × ₹330 × 18% | ₹23,760 |
| Credit left in ledger | ₹33,600 − ₹23,760 | ₹9,840 |
The output tax is fully covered, and ₹9,840 stays in your credit ledger for later months, for example against tax on steel or hardware.
Can you get that ₹9,840 back in cash? The same FAQ says the inverted-duty refund route does not apply where input and output are the same goods, which is a trader's usual position. Plan to use it against future tax. For ITC basics, see how to claim input tax credit.
Advances and bookings around a rate change
Under Notification 66/2017-Central Tax, most registered suppliers of goods do not pay GST on advances; tax arises when the invoice is raised. This relief does not cover composition dealers.
The government FAQ says the rate on such deals follows the time-of-supply provisions, meaning Section 14. The common dealer case is:
- Advance received before the change.
- Goods delivered and invoice raised after the change.
That is the last row of the table, so the new rate applies. A contractor who booked cement on 15 September 2025 and took delivery on 1 October 2025 should have been billed at 18%.
On a rate increase, the same rule means the customer pays the higher rate on goods delivered after the change. Write "GST as applicable on the date of invoice" on booking receipts and quotes. Our guide on making a quotation shows how to word price validity.
Sales returns and credit notes after the rate change
Suppose 20 bags billed at 28% on 18 September 2025 come back on 5 October 2025. Does the credit note show 28% or 18%?
A credit note corrects the tax on the original supply. Published guidance from major tax software providers leans towards using the rate on the original invoice, 28% here, while noting that official clarification on some scenarios was awaited. The logic: at 18%, your tax reduction would not match the tax you actually charged.
- Link every credit note to the original invoice number and date.
- Take the rate from that invoice, not from today's item master.
- If the customer buys replacements, raise a fresh invoice at the current rate.
Confirm your approach with your CA, especially for large returns.
Updating your item master and price list on the change date
Most post-change errors are software errors: nobody updated the item, and the shop billed the old rate for a week. Before a new rate takes effect:
- Update the GST rate on every affected item by HSN code. In 2025, that meant every cement item under HSN 2523, every brand and bag type.
- Check each item's HSN. A wrong HSN gives a wrong rate. See our HSN code guide.
- Revise your price list and share it with regular contractors, so staff do not quote different prices.
- Run a test bill for one item of each rate before opening.
- Keep the old rate history for credit notes against older invoices.
In MaterialBill, you update the GST and selling rate on the item master and share the new price list on WhatsApp, while old invoices keep the rate they were billed at. For current rates on cement, steel and sand, see our GST rate list.
Common mistakes dealers make after a rate change
- Charging the old rate because the stock is "old".
- Reversing ITC unnecessarily on stock still taxable at a lower rate.
- Raising credit notes at the new rate for goods invoiced before the change.
- Pre-dating invoices to before the change to use a lower old rate. This is a serious compliance risk.
- Ignoring challans. If goods went out on a challan before the change and the invoice came after, check the Section 14 table.
GST rates and rules change; check the latest CBIC notification or ask your CA before filing.
Frequently asked questions
If I bought cement at 28%, can I keep selling it at 28%?
No. The sale is taxed at the rate in force on its time of supply. Cement sold after 22 September 2025 is billed at 18%, whatever you paid.
Do I need to reverse ITC when the GST rate on my stock goes down?
Not just because the rate fell. The government FAQ says ITC properly availed can be used for any output tax. Reversal rules apply where goods become exempt.
Can I get a refund of the extra ITC on old stock?
Usually not for a trader, since the inverted-duty refund does not apply where input and output goods are the same. The credit stays in your ledger.
What rate applies to an advance booking delivered after the change?
If the advance came before the change but delivery and invoice came after, the invoice date is the time of supply under Section 14. The new rate applies.
Which rate do I use on a credit note for goods returned after the change?
Published guidance generally points to the original invoice rate. Link the credit note to that invoice and confirm with your CA.
The shops that handle a rate change well are the ones that update their item master on time and keep clean records of old rates. You can start free with MaterialBill's GST billing and update rates across all items before the counter opens.