GST on electrical items sold by a typical shop is mostly 18%. House wire and cable, switches, sockets and MCBs all sit in the 18% slab, and these rates stayed the same after the GST 2.0 changes of 22 September 2025. A few consumer items did move, though. Air-conditioners, for example, came down from 28% to 18%. For an electrical dealer, the work is in using the right HSN for each product, billing wire correctly by coil or metre, and checking the few categories where rates have been reported differently.
This guide covers the main headings, a worked invoice and the points to confirm with your CA.
GST on electrical items: rates at a glance
| Product | HSN heading | GST rate |
|---|---|---|
| House wire, flexible wire, power and control cables | 8544 | 18% |
| Switches, sockets, plugs, MCBs, isolators, distribution boards' switching devices | 8536 | 18% |
| Ceiling, table, wall and exhaust fans | 8414 | 18% |
| Air-conditioners | 8415 | 18% (reduced from 28% under GST 2.0) |
| Plastic conduit pipes | 3917 | 18% |
| LED lamps and LED fittings | 8539 / 9405 | 18% |
Wires and cables come under heading 8544, which covers insulated wire, cable and other insulated electric conductors. Switches, sockets and MCBs come under 8536, which covers electrical apparatus for switching or protecting circuits up to 1,000 volts. Both are at 18%.
GST rates and rules change; check the latest CBIC notification or ask your CA before filing.
MCB HSN code and other switchgear
MCBs are circuit breakers for low voltage and are generally classified under 8536 along with switches and sockets. At the 8-digit level, circuit breakers have their own sub-heading within 8536, separate from switches and plugs. Your manufacturer's invoice will show the full code, so copy it into your item master.
Higher-voltage switchgear, panels and boards can fall under other headings (for example 8535 or 8537), depending on voltage and construction. If you supply panels or industrial switchgear, confirm the classification with your supplier or CA. Shops that focus on this segment may find our page on switchgear shop billing software useful.
For the basics of how many HSN digits to print, see our guide on what an HSN code is.
GST on wires and cables
House wiring is the biggest-value line for most electrical shops. A few practical points:
- Heading 8544 covers insulated copper and aluminium wire, flexible cords, multi-core cables and coaxial cables. All at 18%.
- Bare copper wire or strip that is not insulated is a different product and falls in chapter 74. Do not bill it under 8544.
- Cable accessories such as lugs, glands and connectors can sit under other headings. Use the supplier's HSN.
Coil vs metre billing
Wire is packed in coils of a fixed length printed on the label, but contractors often want cut lengths. Pick one of two clean methods:
- Sell full coils and bill per coil. Stock stays in coils.
- Sell by metre, with stock also kept in metres. Set the conversion once, for example 1 coil = the length printed on the label.
What causes trouble is selling 15 metres from a coil and never reducing stock. After a few months your books show coils that do not exist. MaterialBill's multi-unit billing lets you buy in coils and sell in metres while stock stays correct in one base unit.
GST on LED lights: confirm before you bill
LED products need extra care. LED lamps (bulbs and tubes) are generally classified under heading 8539, and LED light fittings (luminaires, panels, battens) under 9405.
LED lamps and fittings are at 18%. They moved from 12% to 18% from 18 July 2022 on the 47th GST Council's recommendation, and the September 2025 changes did not cut them, so a website still showing 12% is out of date. Take the exact 8-digit HSN from your manufacturer's invoice.
Solar products
The GST Council's 56th meeting press release lists a cut from 12% to 5% for specified renewable energy devices and parts, including solar power devices and solar lamps. The exact items are set out in the notification, so do not apply 5% to every solar-related product. Confirm each item's entry with your CA.
Worked example: an electrical shop invoice
An electrician buys material for a 2BHK flat. The figures below are illustrative prices only, not market rates.
| Line | HSN | Qty | Rate (example) | Taxable value |
|---|---|---|---|---|
| 1.5 sq mm house wire, full coil | 8544 | 6 coils | ₹1,500 | ₹9,000 |
| 2.5 sq mm house wire, cut length | 8544 | 40 m | ₹30 per m | ₹1,200 |
| Modular switches | 8536 | 30 pc | ₹60 | ₹1,800 |
| MCB, single pole | 8536 | 8 pc | ₹250 | ₹2,000 |
| Ceiling fan | 8414 | 3 pc | ₹2,000 | ₹6,000 |
| Total taxable value | ₹20,000 |
All lines are at 18%, so GST is ₹3,600.
- Same-state sale: CGST 9% = ₹1,800 and SGST 9% = ₹1,800.
- Other-state sale: IGST 18% = ₹3,600.
Invoice total: ₹23,600.
Notice that the full coils and the cut length use the same HSN but different units. The invoice should make the unit on each line obvious so the customer and your stock report both understand it.
Contractor sales, credit and returns
Electrical shops sell heavily to electricians and contractors, often on credit and in small, frequent lots.
- GSTIN on the bill. Registered contractors need their GSTIN on your invoice to claim input tax credit.
- Returns after the job. Unused switches and wire come back after most projects. Issue a credit note against the original invoice and reverse the GST on it. Do not cancel the invoice.
- E-way bills for bulk cable. A large cable order can cross the e-way bill threshold quickly. The general limit is ₹50,000 consignment value, but some states set a different intra-state limit, so check your state's limit. Our guide on how to make an e-way bill covers the steps.
- Credit control. Small electrician accounts add up. Track balances and ageing for each party, and follow up before they grow.
Common GST mistakes in electrical shops and how to avoid them
- Keeping an old 28% setting on ACs after the GST 2.0 reduction to 18%.
- Grouping everything under 8544 or 8536. Fans, conduits, LED fittings and tools each have their own heading.
- Assuming LED rates from an old price list or website without checking the supplier invoice.
- Cut-length wire sales without stock conversion, leading to phantom coils in the books.
An electrical shop can carry thousands of SKUs across brands, ratings and sizes. Billing software for electrical shops lets you set HSN and GST per item once, use barcode billing at the counter and keep coil and metre stock consistent. MaterialBill also sends WhatsApp payment reminders to electricians with overdue balances.
Frequently asked questions
What is the GST rate on electrical wires and cables?
Insulated wires and cables under HSN 8544 are taxed at 18%. This rate did not change with the GST 2.0 revisions of 22 September 2025.
What is the HSN code and GST rate for MCBs?
MCBs are generally classified under HSN 8536, the heading for low-voltage switching and protection devices, at 18%. Use the 8-digit code on your supplier's invoice.
What is the GST rate on LED lights?
LED lamps (8539) and LED fittings (9405) are at 18%. Take the exact 8-digit HSN from your manufacturer's invoice.
What is the GST on ceiling fans?
Electric fans, including ceiling, table, wall and exhaust fans, are classified under HSN 8414 and taxed at 18%.
Did GST on air-conditioners change in 2025?
Yes. Under GST 2.0, air-conditioning machines under HSN 8415 came down from 28% to 18% with effect from 22 September 2025.
Electrical billing goes well when every item has the right HSN and wire stock is tracked in the right unit. If you want that set up once and applied to every bill, you can start free with MaterialBill.