GST on PVC pipes is 18%, and the same rate applies to CPVC and uPVC pipes, their plastic fittings, and GI and MS pipes. These rates continued after the GST 2.0 changes of 22 September 2025. For a pipe and plumbing shop, the rate is the easy part. The harder parts are choosing the right HSN code for fittings, billing by length when you stock by piece, and keeping thousands of small fittings in order.
This guide covers each of these, with a worked invoice.
GST on PVC pipes and other pipes: rates at a glance
| Product | HSN heading | What it covers | GST rate |
|---|---|---|---|
| PVC, uPVC, CPVC, HDPE pipes | 3917 | Tubes, pipes and hoses of plastics | 18% |
| Plastic pipe fittings (elbows, tees, couplers, reducers, sockets) | 3917 | The same heading covers fittings for plastic pipes | 18% |
| GI and MS pipes (welded) | 7306 | Other tubes, pipes and hollow profiles of iron or steel | 18% |
| Taps, cocks, valves, ball valves | 8481 | Taps, cocks, valves and similar appliances | 18% |
| Plastic water tanks | 3925 | Builders' ware of plastics | 18% |
| Plastic sanitary items (cisterns, seat covers) | 3922 | Sanitary ware of plastics | 18% |
The CBIC notification for GST 2.0 describes heading 3917 as "tubes, pipes and hoses, and fittings therefor, of plastics". So a PVC elbow and the PVC pipe it joins share the same heading and rate. That makes plastic plumbing one of the simpler categories to set up.
GST rates and rules change; check the latest CBIC notification or ask your CA before filing.
Pipe fittings HSN code: plastic vs metal
Plastic fittings
Fittings for PVC, CPVC, uPVC and HDPE pipes are covered by 3917, as noted above. Solvent cement used to join them is a different product with its own HSN. Take that from the supplier's invoice.
GI and other metal fittings
Fittings for iron and steel pipes (GI elbows, sockets, nipples, unions) are commonly classified under heading 7307, which covers tube or pipe fittings of iron or steel. Brass fittings sit in chapter 74. We were not able to confirm the current rates for these headings from the official notification text, so we are not stating them here. Use the HSN and rate on your manufacturer's invoice, and check with your CA if anything looks off.
Valves and taps
Ball valves, gate valves, foot valves and taps go under 8481, not under the pipe heading. They are at 18%. Keep them as their own item group.
For more on how many HSN digits you must print, see our guide on what an HSN code is.
GST on GI pipes
GI and MS welded pipes are classified under heading 7306 and are taxed at 18%. They are usually sold by length or by weight, depending on the shop. Like TMT bars, steel pipes are part of the iron and steel family. If your shop also sells saria, the weight-based billing logic is similar. Our sariya steel billing software page shows how weight units are handled.
Length vs piece billing
Pipes come in standard lengths from the manufacturer. Many PVC pipes are sold in fixed lengths, while customers often ask for "20 feet of 1-inch pipe". You have three options:
- Bill by piece (length). Sell whole pipes. This is simplest and keeps stock clean.
- Bill by metre or foot. Useful for cut lengths, HDPE coils and garden pipe. Stock must also be tracked in the same unit.
- Bill by weight. Common for GI and MS pipes in some markets.
For GST, any of these is fine as long as the quantity, unit, rate and taxable value agree on each line. The problem is mixing them: buying in pieces, selling in feet, and never converting. Your stock report will never match.
MaterialBill's multi-unit billing lets you define the conversion once, for example 1 pipe = 3 metres. Sell in either unit and the stock updates correctly.
Worked example: a plumbing invoice
A plumber buys material for a new bathroom line. The figures below are illustrative prices only, not market rates.
| Line | HSN | Qty | Rate (example) | Taxable value |
|---|---|---|---|---|
| CPVC pipe, ¾ inch, 3 m length | 3917 | 10 pc | ₹350 | ₹3,500 |
| CPVC elbow, ¾ inch | 3917 | 25 pc | ₹20 | ₹500 |
| CPVC tee, ¾ inch | 3917 | 10 pc | ₹30 | ₹300 |
| Ball valve, ¾ inch | 8481 | 3 pc | ₹400 | ₹1,200 |
| GI pipe, 1 inch | 7306 | 2 pc | ₹1,500 | ₹3,000 |
| Total taxable value | ₹8,500 |
All lines are at 18%, so GST is ₹1,530.
- Same-state sale: CGST 9% = ₹765 and SGST 9% = ₹765.
- Other-state sale: IGST 18% = ₹1,530.
Invoice total: ₹10,030.
Notice that the elbows and tees carry the same HSN as the CPVC pipe, while the ball valve has its own. That one difference is where most HSN errors in plumbing shops come from.
Contractors, quotations and credit sales
Pipe and plumbing shops sell a lot on credit to plumbers and contractors, often against a quotation for a full building.
- Quotations are not invoices. A quotation or estimate carries no GST liability. The tax invoice is raised when goods are supplied.
- Partial deliveries. If a contractor takes material in lots, raise an invoice for each delivery, or use a delivery challan where the rules allow it and invoice later. Our guide on delivery challans explains when a challan works.
- GSTIN on the bill. Registered contractors need your invoice to show their GSTIN so they can claim input tax credit.
- Returns. Unused fittings come back after almost every job. Issue a credit note against the original invoice rather than cancelling it.
Common GST mistakes in pipe shops and how to avoid them
- Putting valves under 3917. Valves and taps belong under 8481.
- One HSN for everything. "Plumbing material, 3917" on a bill that includes GI pipe and brass taps is wrong, even if the rate is the same.
- Cut lengths without stock conversion. Selling in feet while stock stays in pieces creates phantom stock.
- Loose credit. Plumbers' accounts grow quietly. Track each plumber's balance and ageing so nothing is forgotten.
A plumbing shop may stock thousands of fittings across sizes from ½ inch to 4 inches and more, in several brands and pressure classes. Billing software for PVC pipe shops lets you set HSN and rate per item once, scan barcodes at the counter, and see low stock before a contractor's order arrives. MaterialBill's udhaar management keeps every plumber's credit, payments and ageing in one place.
Frequently asked questions
What is the GST rate on PVC pipes in 2026?
PVC, uPVC and CPVC pipes under HSN 3917 are taxed at 18%. The rate did not change with the GST 2.0 revisions of 22 September 2025.
What is the HSN code for PVC pipe fittings?
Plastic pipe fittings such as elbows, tees and couplers are covered by HSN 3917, the same heading as plastic pipes, at 18%.
What is the GST rate on GI pipes?
GI and MS welded pipes under HSN 7306 are taxed at 18%. For GI fittings, use the HSN and rate on your supplier's invoice.
Is CPVC pipe GST different from PVC pipe GST?
No. Both are plastic pipes under HSN 3917 and carry 18% GST.
Can I sell pipes by the foot if I buy them by the piece?
Yes, as long as your stock is converted properly and the invoice shows the unit you sold in. Set the conversion in your software so stock stays accurate.
Pipe shops run on small items and frequent credit. If you want HSN, units and plumber accounts handled together, you can start free with MaterialBill and set up your fittings range step by step.