GST on sand is 5%, and the same 5% applies to gitti and crushed stone aggregate. These are some of the lowest-taxed items a building-material yard sells. Yet many sand and gitti bills still go out at 18% because someone copied the cement or steel setting. Others get billed in "trolley" or "truck" with no measurable unit at all. Both mistakes create problems with customers, with GST returns and, in some states, with mining checks.
This guide explains the sand HSN code, the GST rate on gitti and stone aggregate, how to put brass and CFT on a GST invoice, and the mistakes to avoid.
GST on sand and gitti: rates and HSN codes
| Material | Common names | HSN | GST |
|---|---|---|---|
| Natural sand of all kinds | balu, river sand, Sone sand, Ganga sand | 2505 | 5% |
| Pebbles, gravel, broken or crushed stone | gitti, stone chips, aggregate, ballast | 2517 | 5% |
Both rates are from the GST rate schedule in force after 22 September 2025 (Notification No. 09/2025-Central Tax (Rate)). The Schedule I (5%) list there includes "natural sands of all kinds" under 2505 and "pebbles, gravel, broken or crushed stone" under 2517.
A 5% rate means 2.5% CGST + 2.5% SGST within the state, or 5% IGST across state lines.
Manufactured sand (M-sand) and stone dust: these are made by crushing stone. Whether a particular product falls under 2505 or 2517, and at what rate, can depend on how it is made and described. Check the classification with your CA or supplier invoice before you set up the item. Don't assume it matches river sand.
The number of HSN digits on your invoice depends on turnover (Notification No. 78/2020-Central Tax). Up to ₹5 crore previous-year turnover you print 4 digits. Above ₹5 crore you print 6. If you are new to HSN codes, our HSN guide covers the basics.
The common mistake: billing sand at 18%
Most billing software and bill books start with 18% as the default. If you add "Balu" as a new item and forget to change the rate, every sand bill goes out at 18%. That is 13 percentage points too high.
What happens next:
- Your customer pays more than they should, and a sharp contractor will catch it.
- You report a wrong rate and HSN in GSTR-1, which shows up in your returns data.
- Fixing it means credit notes or revised invoices for every wrong bill.
The fix is simple. Set the HSN and 5% rate once on each sand and gitti item, and stop staff from typing a rate on the bill. Check your GST rates page list against your item master once a quarter.
Units on a sand invoice: brass, CFT and cubic metre
Sand and gitti are sold by volume in most of North and East India. A GST invoice must show quantity and unit, so "1 truck" is not good enough. Use a measurable unit:
| Unit | Equals |
|---|---|
| 1 brass | 100 cubic feet (CFT) |
| 1 cubic metre (m³) | about 35.31 CFT |
| 1 tonne | 1,000 kg = 10 quintal |
Some yards sell by weight (tonne), especially when there is a weighbridge. That works too. Just stay consistent between the challan and the invoice.
A good practice for every load is to measure the body: length × width × height of the material in feet, giving CFT. Write that CFT on the challan and bill it. If the agreement is in brass, divide by 100.
Worked example: GST on a truckload of sand
The rates below are a hypothetical example, not market prices. Sand prices vary heavily by state, season and source.
A truck is loaded with sand. The measured load is 14 ft × 7 ft × 3 ft = 294 CFT (2.94 brass). An extra 150 CFT of gitti goes to the same site. The buyer is in the same state.
| Item | HSN | Qty | Example rate | Taxable value | GST 5% |
|---|---|---|---|---|---|
| River sand | 2505 | 294 CFT | ₹50 per CFT | ₹14,700.00 | ₹735.00 |
| Stone aggregate 20 mm | 2517 | 150 CFT | ₹60 per CFT | ₹9,000.00 | ₹450.00 |
| Total | ₹23,700.00 | ₹1,185.00 |
Split: CGST 2.5% = ₹592.50, SGST 2.5% = ₹592.50. Invoice total = ₹24,885.00.
If you had wrongly billed at 18%, the tax would have been ₹4,266. That is ₹3,081 more on one modest load.
What about freight on sand bills?
Many sand suppliers quote a "delivered at site" rate. Under Section 15(2)(c) of the CGST Act, incidental charges you bill to the buyer form part of the value of the supply. When you sell and deliver the sand as one deal, the freight is generally treated as part of a composite supply, with sand as the main supply, so it takes the 5% rate. If the buyer hires the vehicle and pays the transporter directly, the freight is not on your bill. Confirm unusual set-ups with your CA. For working out freight cost per trip, see our freight costing guide.
Mining challan, royalty and transit documents
Sand and stone are minor minerals, and each state has its own mining rules. Many states require sand and aggregate to move with a state-issued transit pass, mining challan or royalty receipt. The form, name and online portal differ from state to state.
From a billing point of view, keep three things together for every load:
- Your GST invoice or delivery challan
- The state transit or mining document number, if your state requires one
- The e-way bill, where the consignment value exceeds ₹50,000. Some states set a different limit for movement within the state, so check yours.
Royalty and mining charges have their own legal treatment, which depends on who pays them and how they appear on the bill. We have deliberately not given rules on that here. Ask your CA, and check your state mining department's portal for current requirements.
GST rates and rules change; check the latest CBIC notification or ask your CA before filing.
Running a sand and gitti yard's billing well
Volume materials leak money quietly. A few habits help:
- Measure every load and write the CFT on the challan before the truck leaves.
- Bill the same unit you measured. If the challan says 294 CFT, the invoice should too.
- Fix HSN and 5% on the item master so no one has to remember.
- Record vehicle number, driver and site on the challan for proof of delivery.
- Track stock in the same unit you buy in. If you buy by tonne and sell by CFT, set up a conversion so stock reports make sense.
MaterialBill's sand supplier billing software lets you set CFT, brass and tonne as units on the same item through multi-unit billing. It also prints delivery challans with vehicle, site and freight details.
Frequently asked questions
What is the GST rate on sand in 2026?
Natural sand under HSN 2505 is taxed at 5%. Within the state that is 2.5% CGST + 2.5% SGST, and across states 5% IGST.
What is the GST on gitti and stone aggregate?
Gitti, stone chips, ballast and crushed stone fall under HSN 2517 and are taxed at 5%, the same as sand.
What is the HSN code for sand?
The heading for natural sand is 2505. Print 4 digits if your previous-year turnover was up to ₹5 crore and 6 digits if it was above. For M-sand or stone dust, confirm the classification with your CA.
Can I write "brass" on a GST invoice?
Yes, as long as the quantity is clear and consistent. 1 brass = 100 CFT. Many suppliers show CFT and mention brass in the description so both sides can check the figure.
Is an e-way bill needed for a sand truck?
An e-way bill is generally required when the consignment value exceeds ₹50,000, and some states use a different limit within the state. Many states also require their own mining transit pass for sand, separate from GST. Check your state's rules.
If you want sand and gitti bills that use CFT or brass correctly and never default to 18%, MaterialBill can help. You can start free and set up your yard's items in one sitting.