GST on TMT bars is 18%. That rate did not change in the GST 2.0 reform of 22 September 2025, which cut cement but left iron and steel bars where they were. So if you sell sariya, angle, channel or girder, your tax rate is the same as before. What causes trouble for most steel dealers is not the rate. It is picking the right HSN code, billing by weight correctly and keeping the invoice clean enough that a contractor's accountant does not send it back.
This guide explains the HSN codes for steel, how to bill by weight or by piece and how to set up a correct sariya invoice, with a worked example.
GST on TMT bars and sariya: rate and HSN codes
All the common steel items a building-material dealer sells fall under headings 7206 to 7216 of Chapter 72, and the ones below are taxed at 18%.
| Product | HSN heading | What it covers | GST |
|---|---|---|---|
| Wire rod in coils | 7213 | Bars and rods, hot-rolled, in irregularly wound coils | 18% |
| TMT bars / sariya / iron rod (straight lengths) | 7214 | Other bars and rods, hot-rolled, hot-drawn or hot-extruded | 18% |
| Bright bars | 7215 | Other bars and rods (for example cold-formed or cold-finished) | 18% |
| Angles, channels, beams (girders) | 7216 | Angles, shapes and sections, including U, I and H sections | 18% |
7213 vs 7214 vs 7216: why the difference matters
- 7214 is the code for most TMT bars sold in straight 12 m lengths. If you sell 8 mm to 32 mm sariya by the bundle or by the tonne, this is usually your code.
- 7213 is for bars and rods sold in irregularly wound coils. Thin bars supplied as coils fall here, not in 7214.
- 7216 is for structural sections: angle, channel, joist and beam. Do not bill an ISMB beam under 7214 just because it is "steel".
The rate is the same 18%, so a wrong code does not change the tax. But it does make your GSTR-1 HSN summary wrong. It can also cause a mismatch with the codes your supplier uses. The rule on how many digits to print comes from Notification No. 78/2020-Central Tax: 4 digits if your previous-year turnover was up to ₹5 crore, 6 digits above that. Up to ₹5 crore, you may leave out the HSN on B2C invoices. For the basics, read our guide on HSN codes.
Billing TMT bars by weight vs by piece
Sariya is bought from the mill or distributor by weight (tonnes), but many retail customers ask for "20 pieces of 12 mm". Both are fine on a GST invoice, as long as the invoice shows the quantity and unit clearly and the taxable value is right.
The standard weight formula for round bars is kg per metre = d² ÷ 162, where d is the diameter in mm. With a standard bar length of 12 m, the nominal weights (IS 1786) are:
| Size | kg per metre | kg per 12 m bar |
|---|---|---|
| 8 mm | 0.395 | 4.74 |
| 10 mm | 0.617 | 7.40 |
| 12 mm | 0.888 | 10.66 |
| 16 mm | 1.58 | 18.96 |
| 20 mm | 2.47 | 29.64 |
| 25 mm | 3.85 | 46.20 |
| 32 mm | 6.31 | 75.72 |
Two practical ways to bill:
- By weight (kg or tonne): best for contractors and bulk orders. You can weigh on a dharam kanta, or use nominal weight if that is the agreed basis. Print the weighbridge slip number on the bill if you use actual weight.
- By piece, with weight shown: for retail. Keep the rate per kg, convert pieces to kg using the chart, and show both on the invoice line, for example "12 mm TMT – 20 pcs (213.1 kg)".
Whichever you choose, use the same basis on the quotation, the challan and the invoice. Mixed units cause most disputes. For rate setting and price-per-kg maths, see our guide to sariya rates and billing.
Worked example: a GST invoice for TMT bars
The rate per kg below is a hypothetical example, not a market price. Steel rates move daily.
A contractor in the same state buys 100 bars of 12 mm Fe 500D. You bill on nominal weight at an example rate of ₹60 per kg before GST.
| Line | Working | Amount |
|---|---|---|
| Quantity | 100 bars × 10.656 kg | 1,065.6 kg |
| Taxable value | 1,065.6 kg × ₹60 | ₹63,936.00 |
| CGST @ 9% | ₹5,754.24 | |
| SGST @ 9% | ₹5,754.24 | |
| Total before round-off | ₹75,444.48 | |
| Round-off | −₹0.48 | |
| Invoice total | ₹75,444.00 |
If the buyer is registered in another state, charge IGST @ 18% (₹11,508.48) instead of CGST and SGST. The total stays the same.
Because the invoice value is above ₹50,000, an e-way bill will generally be needed for the movement. Some states set a different limit for movement within the state, so check yours. See how to make an e-way bill.
What a correct sariya invoice should show
A clean steel invoice should have:
- Your GSTIN, name, address and a serial invoice number and date
- Buyer's name, address and GSTIN (for B2B), and place of supply
- Description with size and grade (for example "TMT 16 mm Fe 550D"), not just "steel"
- HSN code (7214, 7213 or 7216 as applicable)
- Quantity with unit (kg, tonne or pcs with weight)
- Rate, taxable value, tax rate and CGST/SGST or IGST amounts
- Freight or loading as a separate line if you charge it
If you charge delivery as part of the same sale, it is generally a composite supply and takes the 18% rate of the steel. The value of supply includes incidental charges the supplier bills to the buyer (Section 15(2)(c), CGST Act).
A note on iron and steel scrap (HSN 7204)
Some steel dealers also buy or sell scrap. Ferrous waste and scrap falls under HSN 7204 at 18%. Two special rules have applied to metal scrap since 10 October 2024:
- When an unregistered person sells metal scrap to a registered buyer, the buyer pays GST under reverse charge (Notification No. 06/2024-Central Tax (Rate)).
- When a registered buyer purchases metal scrap from a registered supplier, the buyer must deduct 2% TDS under GST (Notification No. 25/2024-Central Tax). Small contracts and some cases are excluded.
These rules need a separate registration and a monthly return for the TDS deductor, so take your CA's help before you start trading scrap.
GST rates and rules change; check the latest CBIC notification or ask your CA before filing.
Set it up once, bill correctly every day
Most steel GST mistakes come from manual entry: a wrong HSN, a typo in the weight or a rate changed on the wrong line. Set up each size as its own item with HSN, GST rate and kg-per-bar fixed. Then the staff only enter pieces or kg.
MaterialBill's sariya and steel billing software supports multi-unit billing. You can buy in tonnes and sell in kg or pieces, with size-wise stock for 8 mm to 32 mm and a daily rate update on the item master.
Frequently asked questions
What is the GST rate on TMT bars in 2026?
TMT bars are taxed at 18%. The rate was not changed in the September 2025 GST reform. It applies whether you sell by tonne, kg or piece.
What is the HSN code for sariya?
Most straight-length TMT bars fall under HSN 7214. Bars in irregularly wound coils fall under 7213, and angles, channels and beams under 7216. All are 18%. Confirm the 6- or 8-digit code from your mill or distributor invoice.
Can I bill sariya by piece on a GST invoice?
Yes. Show the number of pieces and, ideally, the weight on the same line, and keep the rate per kg consistent. The tax is 18% of the taxable value however you count the quantity.
Is GST on iron rod different from TMT bars?
No. Iron and steel bars and rods under headings 7213 to 7215 carry 18%, as do sections under 7216. The name a customer uses ("iron rod", "sariya", "TMT") does not change the rate.
Do I charge GST on freight for steel delivery?
If you deliver as part of the same sale and charge freight on your invoice, it is generally a composite supply taxed at 18% with the steel. If the buyer pays the transporter directly, it stays off your invoice.
If you want steel bills that work out the weight, split the tax and print the HSN for you, try MaterialBill. You can start free and set up your sizes in an afternoon.