Home › Blog › GST rates and invoices › Multiple GST Rates in One Invoice

Multiple GST Rates in One Invoice: Billing Cement, Steel and Sand Together

Quick answer

Yes. One GST invoice can have items at different GST rates. Show each line with its own rate and tax amount (Rule 46 of the CGST Rules).

Line Taxable value GST
Cement ₹32,000 18% (₹2,880 CGST + ₹2,880 SGST)
Natural sand ₹13,500 5% (₹337.50 CGST + ₹337.50 SGST)
In this article
  1. Can you show multiple GST rates in one invoice?
  2. What each line of a mixed GST invoice must show
  3. Worked example: cement, steel, sand and gitti on one invoice
  4. The rate-wise tax summary
  5. Round-off on a mixed GST invoice
  6. Mixed supply vs separate items: when one price changes everything
  7. Common mistakes on multi-rate invoices
  8. Frequently asked questions

A contractor walks in and orders cement, TMT bars, sand and gitti for one site. Can all of it go on one bill? Yes. Showing multiple GST rates in one invoice is completely normal under GST, and building-material dealers do it every day. What matters is that each line carries its own HSN code and rate, and that the tax is calculated and summarised correctly.

This guide shows how to lay out a mixed GST invoice, with a full worked example using 18% and 5% items, a rate-wise summary and round-off.

Can you show multiple GST rates in one invoice?

There is no rule that says one invoice must have one rate. Rule 46 of the CGST Rules lists what a tax invoice must contain, and several of those particulars are framed around each item supplied: description, HSN code, quantity and unit, taxable value, rate of tax and amount of tax under each head (CGST, SGST or IGST).

So a single invoice can carry cement at 18%, steel at 18% and sand at 5%, as long as each item's rate and tax are shown properly.

After GST 2.0 (effective 22 September 2025), the typical rates for a building-material yard are:

Item HSN GST rate
Cement 2523 18%
TMT bars / iron and steel bars 7213 / 7214 18%
Natural sand 2505 5%
Stone aggregate / gitti 2517 5%
PVC pipes and fittings 3917 18%
Cut and polished marble/granite slabs 6802 18%

For the full list, see our GST rate list.

What each line of a mixed GST invoice must show

Every item line should have:

  1. Description that is specific, for example "TMT bar Fe 500D 12 mm", not just "steel".
  2. HSN code. Under Notification 78/2020-Central Tax, from 1 April 2021, a business with aggregate turnover up to ₹5 crore in the previous year shows 4 digits; above ₹5 crore, 6 digits. Businesses up to ₹5 crore may skip HSN on B2C invoices. Our HSN code guide explains how to find yours.
  3. Quantity and unit: bags, kg, quintal, tonne, CFT or brass.
  4. Rate per unit and taxable value, after any discount on that line.
  5. GST rate for that line.
  6. Tax amount: CGST and SGST for a sale within your state, or IGST for a sale to another state.

The invoice must also carry the standard header details: your name, address and GSTIN, a serial number, date, the buyer's details (and GSTIN for a registered buyer), and place of supply. For the full format, see how to make a GST bill.

Worked example: cement, steel, sand and gitti on one invoice

A contractor in the same state buys for one site. All prices are examples only, not market rates.

# Item HSN Qty Unit Rate (₹) Taxable value (₹) GST CGST (₹) SGST (₹)
1 Cement PPC 50 kg 2523 100 Bag 320.00 32,000.00 18% 2,880.00 2,880.00
2 TMT bar Fe 500D 12 mm 7214 1.2 Tonne 55,000.00 66,000.00 18% 5,940.00 5,940.00
3 Natural sand 2505 300 CFT 45.00 13,500.00 5% 337.50 337.50
4 Gitti 20 mm 2517 200 CFT 52.50 10,500.00 5% 262.50 262.50

For each line, the tax is taxable value × rate, split equally into CGST and SGST. For example, cement: ₹32,000 × 18% = ₹5,760, which is ₹2,880 CGST plus ₹2,880 SGST.

If this contractor's site were in another state, each line would show IGST at the full rate instead, for example ₹5,760 IGST on the cement line.

The rate-wise tax summary

Below the item lines, a clear invoice groups the tax by rate. This is what your CA and your buyer's accountant look at, and it matches how GST returns report supplies.

GST rate Taxable value (₹) CGST (₹) SGST (₹) Total tax (₹)
18% 98,000.00 8,820.00 8,820.00 17,640.00
5% 24,000.00 600.00 600.00 1,200.00
Total 1,22,000.00 9,420.00 9,420.00 18,840.00

Invoice total before round-off: ₹1,22,000 + ₹18,840 = ₹1,40,840.00.

Always check that the summary taxable value equals the sum of the item lines. If it does not, a line has the wrong rate or HSN.

Round-off on a mixed GST invoice

Section 170 of the CGST Act says tax and other amounts payable under the Act are rounded to the nearest rupee: 50 paise or more goes up, less than 50 paise is dropped.

On invoices, most businesses work out tax to the paisa on each line and then show a separate "Round off" line so the grand total is a whole rupee. Suppose a bill came to ₹48,731.42. You would show:

Keep the round-off on a separate line. Do not quietly adjust a taxable value or tax figure to hide the difference; your returns should match the line-level tax.

Mixed supply vs separate items: when one price changes everything

There is one trap. GST law has a concept called mixed supply (Section 2(74) of the CGST Act): two or more separate items sold together for a single price. Under Section 8(b), a mixed supply is taxed at the highest rate among its items.

For a building-material dealer, this matters if you sell a "package" at one lump sum, for example "complete material for one room: ₹50,000 all-inclusive" without breaking it up. Tax authorities could treat the whole amount at the highest rate in the bundle, which would be 18% even though part of it was sand at 5%.

The fix is simple: price and bill each item separately, with its own quantity, rate and HSN. Then each item takes its own GST rate. This is different from composite supply, where items are naturally bundled with one principal supply, such as goods with transport. Freight and loading charges are covered in our separate guide on freight in a GST invoice.

Common mistakes on multi-rate invoices

In MaterialBill, each item in the master carries its own HSN and GST rate, so a bill with cement, steel and sand picks the right rate per line and splits CGST and SGST or IGST for you, with multi-unit billing for bags, tonnes and CFT on the same invoice.

GST rates and rules change; check the latest CBIC notification or ask your CA before filing.

Frequently asked questions

Is it allowed to show multiple GST rates in one invoice?

Yes. Rule 46 requires the description, HSN, taxable value, rate and tax for the goods supplied, so each line can carry its own rate on the same invoice.

Should I make separate bills for 5% and 18% items?

You do not have to. One invoice with line-wise rates and a rate-wise summary is fine. Some dealers split bills only for a customer's own accounting needs.

How do I calculate CGST and SGST on a mixed invoice?

For each line, multiply taxable value by the GST rate, then split it equally into CGST and SGST for a sale within your state. For an interstate sale, show the full amount as IGST.

What if I sell a material package at one lump-sum price?

That may be treated as a mixed supply and taxed at the highest rate in the package. Price each item separately to apply the correct rate to each.

Is round-off allowed on a GST invoice?

Yes. Section 170 provides for rounding to the nearest rupee. Show it as a separate round-off line on the invoice.

A mixed GST invoice is only hard when it is done by hand. If you want each line to pick its own HSN and rate and the tax to be split correctly on every bill, you can start free with MaterialBill's GST billing.

Related articles

GST on Cement in 2026 GST on TMT Bars and Sariya GST on Sand, Gitti and Stone Aggregate GST on Bricks Explained GST on Marble and Granite After GST 2.0 GST on Tiles and Sanitaryware All blog posts

Start Free Today

Set up in two minutes. No card required. Leave whenever you like — your data always stays yours.