Home › Blog › Product knowledge and calculators › AAC Blocks vs Red Bricks vs Fly Ash Bricks

AAC Blocks vs Red Bricks vs Fly Ash Bricks: What Customers Ask and What to Stock

Quick answer

AAC blocks are large, light blocks (one block replaces several bricks) with fewer joints and less mortar. Red bricks are the heaviest per wall area; fly ash bricks are more uniform in size.

Point Red bricks Fly ash bricks AAC blocks
Size Small Small, uniform Large (e.g. 600 × 200 mm)
Weight Heaviest Medium Lightest
In this article
  1. The three products in plain words
  2. AAC blocks vs red bricks: a quick comparison table
  3. AAC block size: what the BIS standard says
  4. AAC block GST and brick GST: classification first, rate second
  5. What customers actually ask (and honest answers)
  6. Handling and breakage: where dealers lose money
  7. What to stock: a simple decision method
  8. Frequently asked questions

Walk into any building material shop in Patna, Gorakhpur or Asansol and you will hear the same question: "AAC block lein ya lal eent?" The AAC blocks vs red bricks debate is no longer only for big-city builders. Homeowners, contractors and small builders are all asking, and fly ash bricks add a third option.

This guide covers how the three differ, AAC sizes, GST classification, breakage and stock mix. It is written for the dealer; structural decisions stay with the customer's engineer.

The three products in plain words

Red bricks (clay bricks) are moulded from clay and fired in a kiln. They are the traditional choice, masons know them, and they are sold by the thousand.

Fly ash bricks are made from fly ash (a thermal power plant by-product) with lime or cement, sand and gypsum, then pressed and cured. They are usually more uniform in size than kiln bricks.

AAC blocks (autoclaved aerated concrete) are large, light blocks made from cement, lime, fly ash or sand and an aerating agent, cured under steam pressure in an autoclave. The air pockets make them light. One block replaces several bricks.

AAC blocks vs red bricks: a quick comparison table

This table sticks to practical differences. For strength, density and fire rating, point the customer to the manufacturer's data sheet.

Point Red (clay) bricks Fly ash bricks AAC blocks
Made from Fired clay Fly ash, lime/cement, sand, gypsum Cement, lime, fly ash or sand, aerating agent; autoclaved
Size Small, brick format Small, brick format, more uniform Large blocks (see size section)
Weight per wall area Heaviest Medium Lightest
Sold by Per 1,000 or per piece Per 1,000 or per piece Per piece or per cubic metre
Mortar / adhesive Cement-sand mortar Cement-sand mortar Thin-bed block adhesive or mortar, as maker advises
Breakage risk in handling Medium (corners chip) Low to medium Higher at edges if dropped
Typical GST heading 6904 10 00 (building bricks) 6815 6815 or 6810, depends on fly ash content
Who usually asks Homeowners, traditional masons Cost-conscious builders Builders, multi-storey and partition work

AAC block size: what the BIS standard says

AAC blocks in India are covered by the BIS specification IS 2185 (Part 3) for autoclaved cellular concrete blocks. The published standard, IS 2185 (Part 3):1984, lists these nominal dimensions:

Actual dimensions are 10 mm less than nominal (6 mm less where fine jointing is used). The standard also allows other sizes when specified, and makers commonly sell 600 or 625 mm long blocks with a 200 mm face in thicknesses from about 75 to 300 mm; one large manufacturer lists a 600 × 200 × 200 mm block. Check each supplier's catalogue, because the thicknesses they make vary.

The standard also sets density bands (roughly 451 to 1,000 kg per m³) with a minimum strength for each. If a contractor asks "kitna strong hai?", show the supplier's stated grade instead of guessing.

Worked example: how many AAC blocks per cubic metre

AAC blocks are often priced per cubic metre, but customers think in pieces. Here is the calculation for a 600 × 200 × 200 mm block:

For a 600 × 200 × 100 mm block, volume is 0.012 m³, so about 83 blocks per m³.

Now a billing example with an illustrative price (not a market rate): suppose your supplier's rate is ₹4,000 per m³ for 200 mm blocks and a customer wants 250 blocks.

Set the item as "buy in m³, sell in pieces" at 41.67 pieces per m³. MaterialBill's multi-unit billing is meant for this kind of conversion, so stock and bill agree; set up and test the units before you go live.

AAC block GST and brick GST: classification first, rate second

The rate depends on the HSN heading, and the heading depends on what the product is made of.

Red bricks. Building bricks (6904 10 00) fall under the special scheme for bricks. Under this scheme a supplier can charge 12% with input tax credit, or 6% without input tax credit. The option has conditions, so confirm them with your CA before choosing.

Fly ash bricks and blocks (6815). "Fly ash bricks; fly ash aggregates; fly ash blocks" under heading 6815 are listed in Notification No. 14/2025-Central Tax (Rate), dated 17 September 2025, at 6% central tax (12% total with state tax), effective 22 September 2025.

AAC blocks. This is where care is needed:

Practical rule: never copy the red brick rate onto AAC blocks, and keep fly ash AAC and normal AAC as separate items if your supplier bills them under different headings. Our GST rates page and the HSN code guide explain how headings work.

GST rates and rules change; check the latest CBIC notification or ask your CA before filing.

What customers actually ask (and honest answers)

"Which is cheaper?" Compare the cost of a finished wall, not one piece. AAC needs fewer joints and less mortar; bricks need more mortar and labour. Quote both for the same wall area.

"Which is stronger?" It depends on the grade. Do not claim one is "stronger" in general. Load-bearing decisions belong to the engineer.

"Will my mason manage AAC?" Masons used to clay bricks may need the supplier's laying instructions.

"Is fly ash brick as good as lal eent?" Quality depends on the plant. Show a sample and stock from a supplier you trust.

Handling and breakage: where dealers lose money

AAC edges chip when blocks are thrown from a truck, and bricks crack when unloaded carelessly. Unrecorded breakage quietly eats margin.

If you deliver to sites, a delivery challan signed at the site, with a count of good and broken pieces, ends most arguments before they start.

What to stock: a simple decision method

There is no universal stock mix. Use your own sales history:

  1. Look at last season's demand, including sales lost for lack of stock.
  2. Match your customers. Many homeowners still prefer red bricks; builders doing partition work often ask for AAC.
  3. Check yard space and how each product must be stacked.
  4. Check supply. Keep alternatives ready if kiln supply is irregular in your area.
  5. Start small with one or two AAC thicknesses that local builders use.

Keep separate items for each size and thickness so your stock reports show what really moves.

Frequently asked questions

Is AAC block cheaper than red bricks?

Per piece, no, because one AAC block replaces several bricks. Compare the total cost of the same wall area, including mortar and labour, and quote both options to the customer.

What is the standard AAC block size?

IS 2185 (Part 3) lists nominal lengths of 400, 500 or 600 mm, heights of 200, 250 or 300 mm and widths of 100 to 250 mm, and allows other sizes when specified. In the market, 600 × 200 mm faces with thicknesses from about 75 to 300 mm are common.

What is the GST on AAC blocks?

It depends on classification. AAC blocks with more than 50% fly ash fall under 6815 at 12% as per CBIC's clarification. Others are generally under 6810. Take the HSN and rate from your supplier's invoice and confirm with your CA.

Fly ash bricks vs red bricks: which should a dealer stock?

Stock what your local customers ask for, and watch a season of sales data before shifting the mix.

How many AAC blocks are in one cubic metre?

For a 600 × 200 × 200 mm block, about 41.7 blocks. For a 600 × 200 × 100 mm block, about 83 blocks.

Selling bricks, fly ash bricks and AAC blocks together means juggling pieces, thousands, cubic metres and different HSN codes on the same bill. If you run a bricks shop or cement block business, you can start free with MaterialBill and set up each product with its own unit and tax rate.

Related articles

TMT Bar Weight Chart TMT Bar Grades Fe415, Fe500, Fe500D and Fe550D OPC vs PPC Cement (and PSC) Cement Shelf Life and Storage Cement Sand Aggregate Calculation for 1 Cubic Metre of Concrete How Many Bricks in a Wall All blog posts

Start Free Today

Set up in two minutes. No card required. Leave whenever you like — your data always stays yours.