In any cement shop in Bihar or Bengal you'll hear the same questions: "OPC dena ya PPC?", "53 grade is stronger, right?", "Which cement is best for a house?" The OPC vs PPC cement question has no single right answer. Each type is made for different work, and a good dealer helps customers match cement to the job without pretending to be their engineer. This guide covers the Indian Standards behind each type, where each is used, how to talk to customers, and how to plan stock.
The three common cement types and their IS codes
Three types make up most cement sold through building material shops in India. Each has its own Bureau of Indian Standards (BIS) specification.
| Type | Full name | Indian Standard | Main ingredient besides clinker and gypsum |
|---|---|---|---|
| OPC | Ordinary Portland Cement | IS 269:2015 (grades 33, 43, 53, 43S, 53S) | None (performance improvers allowed in small amounts) |
| PPC | Portland Pozzolana Cement (fly ash based) | IS 1489 (Part 1) | Fly ash, 15% to 35% by mass |
| PSC | Portland Slag Cement | IS 455 | Granulated blast-furnace slag |
A few notes:
- IS 269:2015 now covers all OPC grades in one standard. You may still see older references to IS 8112 (43 grade) and IS 12269 (53 grade) on old documents.
- IS 1489 Part 1 covers fly ash based PPC. A Part 2 exists for calcined clay based PPC, which is much less common in retail.
- IS 455 sets the slag range for PSC. Sources summarising it give slightly different upper limits, so check the latest edition on the BIS website if a customer needs the exact figure.
- OPC and PPC are under mandatory BIS certification, so bags should carry the ISI mark and the standard number.
OPC: grades 33, 43 and 53
OPC is made by grinding clinker with gypsum. Its grade number is the minimum compressive strength, in N/mm² (MPa), that standard mortar cubes made with it must reach at 28 days. So OPC 53 must reach at least 53 MPa, OPC 43 at least 43 MPa and OPC 33 at least 33 MPa.
OPC 53 vs OPC 43
- OPC 53 gains strength fastest. It suits work where early strength matters: precast items, high-grade concrete designed by an engineer, and jobs where formwork must be stripped early. Fast strength gain also means more heat while setting, so careful curing is essential.
- OPC 43 is a general-purpose grade used for ordinary concrete, plastering and masonry where very high early strength isn't needed.
- OPC 33 is rarely stocked today; some masonry and plaster work used it in the past.
Higher grade isn't automatically better for every job. Mix, water and curing matter as much as cement grade.
OPC vs PPC cement: what fly ash changes
PPC blends OPC clinker with fly ash, a by-product from thermal power plants. Under IS 1489 Part 1, fly ash must be 15% to 35% of the cement by mass.
What dealers should know:
- Slower early strength, continued gain later. PPC gains strength more slowly in the first days than OPC, but keeps gaining over a longer period. It needs proper, longer curing.
- Durability. Fly ash reacts with by-products of cement hydration to form additional binding compounds. Engineers often prefer it where durability and lower heat of hydration matter, for example in mass concrete, foundations and plaster.
- Common for general work. PPC is often used for plastering, brickwork and general concrete, provided the site cures it properly.
PSC: slag cement
PSC blends OPC clinker with granulated blast-furnace slag, a by-product of steel plants.
- Behaviour. Like PPC, PSC gains strength more slowly early on, and needs good curing.
- Where it is preferred. Engineers often choose PSC for marine and coastal work, foundations in aggressive soils, and mass concrete, because slag cement resists chloride and sulphate attack better than plain OPC. For very severe sulphate exposure, engineers may specify sulphate-resisting cement (IS 12330) instead.
Which cement is best for a house? How to answer customers
This is the question you'll hear most. Here is a safe, useful way to respond.
Start with the engineer. If the customer has a structural drawing or a site engineer, the specification on the drawing decides cement type and grade. Supply exactly that.
If there's no engineer, explain the general difference, without promising performance:
| Work | What's commonly used | What to tell the customer |
|---|---|---|
| RCC slab, beams, columns | OPC 43/53 or PPC, as the engineer specifies | "The engineer's mix design decides; ask them which type and grade." |
| Plaster and brickwork | PPC or PSC often preferred | "Blended cement is commonly used for plaster. Cure it properly for several days." |
| Foundations, damp or aggressive soil | PPC or PSC often preferred | "Blended cement often handles harsh conditions better. Check with an engineer." |
| Precast items, early de-shuttering | OPC 53 | "Gains strength faster; still needs curing." |
| Repairs, small jobs | Usually whatever is fresh and available | "Check the manufacturing date first." |
- Stay brand-neutral. Every bag sold under an IS code must meet the same minimum requirements. Point customers to the ISI mark, the type and grade printed on the bag, and the date of manufacture.
- Talk about freshness. Cement is best used within about three months of manufacture; strength falls with age and moisture. A fresh bag of any type beats an old bag of a "better" type.
- Stress curing. Most cracking complaints come from too much water or too little curing, not the cement type.
What to stock: building a practical cement mix
There's no universal ratio. Plan from your last three to six months of sales by type and grade:
- Keep your fastest mover deep. Check which type and grade sells most in your area, and never run short of it.
- Carry one OPC grade (usually 53 or 43, whichever your local contractors ask for) for RCC and precast customers.
- Don't overstock slow types. Cement ages. Holding many types in small quantities means older bags at the back of every stack.
- Order against confirmed bulk orders. For builders taking hundreds of bags, schedule company dispatches to match pours rather than holding the stock yourself.
- Store well, sell first-in-first-out. Stack on a raised platform away from walls, no more than about 10 bags high, and sell the oldest stock first.
Worked example: a monthly cement plan
A dealer sells about 4,000 bags a month (200 tonnes, at 50 kg per bag). The split below is an example only; your own sales will differ.
| Type | Share of sales (example) | Bags per month | Stock to hold for ~10 days |
|---|---|---|---|
| PPC | 60% | 2,400 | ~800 bags |
| OPC 53 | 25% | 1,000 | ~330 bags |
| PSC | 15% | 600 | ~200 bags |
Ten days of cover keeps stock fresh with room for supply delays; adjust it to dispatch reliability and godown space. For dealership requirements, see our guide on getting a cement dealership. For yard and godown planning, see godown management.
GST and billing for cement
All three types are classified under HSN 2523 and taxed at 18% from 22 September 2025 (earlier 28%). The type doesn't change the rate. Do print the type and grade in the item description, for example "PPC 50 kg bag" or "OPC 53 50 kg bag", so contractors can match it to their specification.
Set up each type, grade and brand as its own item so stock, rates and reorder levels stay separate. MaterialBill handles cement by bag, tonne or both, with low-stock alerts per item, and you can see more on our cement shop billing software page.
GST rates and rules change; check the latest CBIC notification or ask your CA before filing.
Frequently asked questions
What is the main difference between OPC and PPC cement?
OPC is clinker and gypsum. PPC adds 15% to 35% fly ash under IS 1489 Part 1. PPC gains strength more slowly at first but continues to gain over time and is often preferred for durability. OPC gains early strength faster.
Is OPC 53 better than OPC 43?
OPC 53 reaches a higher minimum 28-day strength and gains strength faster. That's useful for some work, but not automatically better for plaster or masonry. The engineer's specification should decide.
Which cement is best for a house?
It depends on the work and the engineer's design. Blended cements like PPC and PSC are widely used in homes, while OPC is often used for RCC where specified. Always use fresh cement and cure properly.
What is PSC cement used for?
PSC contains granulated blast-furnace slag. Engineers often prefer it for marine and coastal work, foundations in aggressive soils, and mass concrete.
Does GST differ between OPC, PPC and PSC?
No. All three fall under HSN 2523 at 18% from 22 September 2025.
Knowing the difference helps you guide customers honestly and stock the right mix. You can start free with MaterialBill and track each cement type with its own rate and stock level.