A building material shop deals in more units than almost any other trade. Sand comes in brass, gitti in CFT, the engineer's estimate is in cubic metres, steel is bought in tonnes and sold in kg or quintal, and cement goes by the bag. Converting brass to cubic feet, CFT to cubic metres or tonnes to quintals is something you do many times a day — and a small mistake on a big order costs real money. This guide puts every common conversion in one place, with worked examples and rate conversions you can use at the counter.
The core units in a building material trade
Before the numbers, a quick refresher on what each unit is:
- CFT (cubic foot): a cube 1 ft × 1 ft × 1 ft. The everyday unit for sand, gitti and stone in much of north and east India.
- Brass: 100 CFT. A traditional trade unit, not an SI unit, widely used for sand and aggregate in many states.
- Cubic metre (m³): a cube 1 m on each side. Used in engineering drawings, BOQs and government work.
- Kg, quintal, tonne: weight units. 1 quintal = 100 kg; 1 tonne = 1,000 kg = 10 quintal.
- Bag: for cement, one bag is 50 kg, so 20 bags make 1 tonne.
All the volume conversions come from one exact fact: 1 foot = 0.3048 metre (the international foot). Everything else follows from that.
Brass to cubic feet and cubic metre: the master table
| From | To | Multiply by | Example |
|---|---|---|---|
| Brass | CFT | 100 | 2.5 brass = 250 CFT |
| CFT | Brass | 0.01 (÷ 100) | 450 CFT = 4.5 brass |
| Cubic metre | CFT | 35.31 | 6 m³ ≈ 211.9 CFT |
| CFT | Cubic metre | 0.02832 | 100 CFT ≈ 2.83 m³ |
| Brass | Cubic metre | 2.832 | 2.5 brass ≈ 7.08 m³ |
| Cubic metre | Brass | 0.3531 | 10 m³ ≈ 3.53 brass |
The exact figures are 1 m³ = 35.3147 CFT and 1 CFT = 0.0283168 m³. Rounding to 35.31 and 0.02832 is accurate enough for any bill.
Quick lookup: brass and cubic metres
| Brass | CFT | Cubic metre (approx.) |
|---|---|---|
| 1 | 100 | 2.83 |
| 2 | 200 | 5.66 |
| 2.5 | 250 | 7.08 |
| 3 | 300 | 8.50 |
| 5 | 500 | 14.16 |
| Cubic metre | CFT (approx.) | Brass (approx.) |
|---|---|---|
| 1 | 35.3 | 0.35 |
| 3 | 105.9 | 1.06 |
| 5 | 176.6 | 1.77 |
| 10 | 353.1 | 3.53 |
Weight units: kg, quintal, tonne and bag
| From | To | Multiply by | Example |
|---|---|---|---|
| Tonne | Quintal | 10 | 18.5 t = 185 quintal |
| Quintal | Kg | 100 | 4.26 quintal = 426 kg |
| Tonne | Kg | 1,000 | 18.5 t = 18,500 kg |
| Tonne of cement | Bags (50 kg) | 20 | 18.5 t = 370 bags |
| Kg | Quintal | 0.01 | 426 kg = 4.26 quintal |
Steel: from pieces to kg
TMT bars are often counted in pieces but billed by weight. The standard formula is kg per metre = d² ÷ 162, where d is the bar diameter in mm. For a 12 mm bar: 144 ÷ 162 = 0.889 kg/m. A standard 12 m bar therefore weighs about 144 ÷ 162 × 12 = 10.67 kg (nominal).
Example: 40 bars of 12 mm = 40 × 10.67 ≈ 427 kg ≈ 4.27 quintal. This is the nominal weight; the actual weighbridge weight can differ a little. For the full chart and billing rules, see our guide on sariya rate and billing.
Length and area units for tiles, pipes and sheets
| From | To | Multiply by |
|---|---|---|
| Metre | Feet | 3.281 |
| Feet | Metre | 0.3048 |
| Inch | Millimetre | 25.4 |
| Square metre | Square feet | 10.764 |
| Square feet | Square metre | 0.0929 |
A useful check for tile dealers: a 600 × 600 mm tile is 0.36 m², which is about 3.88 sq ft — slightly less than a true 2 × 2 ft tile (4 sq ft). When a customer quotes room size in sq ft and the box label is in m², convert carefully.
Running feet (RFT), used for pipes, beading and some profiles, is simply length in feet: 100 RFT = 30.48 m.
Converting rates, not just quantities
This is where many counter mistakes happen. When the unit changes, the rate must change in the opposite direction.
Worked example: rate per brass to rate per CFT and per m³
Suppose (example figure only, not a market price) you sell sand at ₹5,000 per brass.
- Per CFT: ₹5,000 ÷ 100 = ₹50 per CFT
- Per m³: ₹5,000 ÷ 2.832 = about ₹1,766 per m³
Now a contractor sends a BOQ that asks for 3 m³ of sand.
- 3 m³ = 3 × 35.31 = about 105.9 CFT = about 1.06 brass
- Amount = 105.9 × ₹50 = about ₹5,297, before GST
Natural sand (HSN 2505) is taxed at 5% GST. See our GST rates page for other items. GST rates and rules change; check the latest CBIC notification or ask your CA before filing.
Worked example: buy in tonnes, sell in kg
You buy 10 tonnes of a hardware item for (example figure) ₹5,00,000. Your cost per kg is:
- 10 t = 10,000 kg
- ₹5,00,000 ÷ 10,000 = ₹50 per kg, which is ₹5,000 per quintal
Every margin calculation should be on this per-unit cost, including freight and loading. For the full method, read our guide on how to calculate profit margin.
Common conversion mistakes at the counter
- Mixing up CFT and brass by a factor of 100. Writing "2.5" in the CFT column instead of the brass column turns a ₹12,500 bill into ₹125. Always label the unit on every line.
- Using 35 instead of 35.31. On 10 m³ it is a 3 CFT difference — small, but on a big contract it adds up and causes disputes.
- Treating volume and weight as the same. A brass of sand does not have a fixed weight; it depends on moisture and type. Do not convert brass to tonnes using a fixed figure unless you and the buyer have agreed on it.
- Forgetting to convert the rate. If the quantity is converted to m³, the rate must also be per m³.
- Rounding too early. Do the full calculation first, then round the final quantity once.
Setting up multiple units in your billing software
Doing these conversions by hand on every bill is slow and error-prone. A billing app that understands multiple units can do it for you. In MaterialBill, multi-unit billing lets you set a base unit for an item and add others with a conversion factor — for example, a steel item bought in tonnes and sold in kg or quintal, or sand bought by the truck and sold in CFT or brass. The rate on the bill then follows the unit you pick. Stock is kept in one base unit, so your stock management figures stay correct whichever unit you sold in.
A good setup checklist:
- Choose the base unit you actually count stock in (CFT for sand, kg for steel, bag for cement).
- Add each selling unit with its exact factor (brass = 100 CFT; quintal = 100 kg).
- Set the rate in the base unit, and let the software convert.
- Print the unit on every invoice line so the customer sees exactly what they bought.
Frequently asked questions
How many cubic feet are in 1 brass?
One brass is 100 cubic feet (CFT). So 2.5 brass is 250 CFT and 4.5 brass is 450 CFT.
How many cubic metres are in 1 brass?
About 2.83 m³. That follows from 1 CFT = 0.0283 m³, multiplied by 100.
How do I convert cubic metres to CFT?
Multiply by 35.31. For example, 6 m³ × 35.31 ≈ 211.9 CFT. To go back, multiply CFT by 0.02832.
How many quintals are in a tonne?
Ten. One quintal is 100 kg and one tonne is 1,000 kg. One tonne of cement is 20 bags of 50 kg.
Can I convert a brass of sand into tonnes?
Not with a fixed factor. The weight of a brass changes with moisture, grain size and type of sand. If you sell by weight, use a weighbridge; if by volume, measure the load.
Unit mix-ups are one of the easiest losses to stop. If you want every bill to convert brass, CFT, kg and quintal correctly on its own, you can start free with MaterialBill's building material billing software.