"How many tiles do I need?" is one of the first questions a customer asks at a tiles counter, usually with a rough room size scribbled on paper. If you get the answer right, the job finishes with one or two spare tiles. If you get it wrong, the customer comes back for a single box three weeks later, and by then that batch's shade may not be in stock. This guide covers the calculation dealers use: measure the area, convert it to boxes, add wastage and skirting, then turn it into a clean quotation.
Step 1: Measure the area correctly
Every tile calculation starts with area in square feet (or square metres). For a floor this is length × width. For walls it is the wall length × tiling height, minus large openings such as doors.
Get measurements in feet, ideally from the mason. Split L-shaped rooms into rectangles and add them. Do not deduct small items such as a floor trap. Those still need cut tiles.
| Surface | Formula | Example |
|---|---|---|
| Floor | Length × Width | 12 ft × 10 ft = 120 sq ft |
| Wall (one) | Wall length × Tiling height | 7 ft × 7 ft = 49 sq ft |
| Bathroom walls (all four) | Perimeter × Height − door | 2 × (7 + 5) × 7 − (2.5 × 7) = 150.5 sq ft |
| Skirting | Perimeter − door widths | 2 × (12 + 10) − 3 = 41 running ft |
Step 2: Find the coverage of one box
Tiles are sold by the box, and how much area a box covers depends on the tile size and on how many pieces the manufacturer packs in it. Packing varies by brand, size and even by series, so always read the coverage printed on the box or in the company's price list. Never assume.
To see how the figure is worked out, take a 600 × 600 mm tile:
- One tile = 0.6 m × 0.6 m = 0.36 m² ≈ 3.875 sq ft
- If the box holds 4 pieces (an example only), coverage = 1.44 m² ≈ 15.5 sq ft
For a 300 × 450 mm wall tile:
- One tile = 0.135 m² ≈ 1.453 sq ft
- If the box holds 8 pieces (again an example), coverage ≈ 11.63 sq ft
The conversion used is 1 m² = 10.7639 sq ft. Some catalogues round box coverage to one decimal place, so small differences from your own figure are normal.
Step 3: Add tile wastage
Tiles get cut at the edges, a few break in transport or while being cut, and a careful customer keeps some spares for future repairs. That is why you never quote the bare area.
The allowances below are rough starting points that tiling guides commonly suggest. The mason's advice for the actual job should take priority:
| Laying pattern / job | Typical extra to add |
|---|---|
| Straight lay, large or medium tiles, simple room | about 5–10% |
| Bathrooms, kitchens, many cuts around fixtures | about 10–15% |
| Diagonal, herringbone or complex patterns | 15% or more |
| Small tiles, mosaics, irregular natural stone | 10–20% |
A room with many corners, pillars or niches needs extra on top. Very large-format tiles also produce more waste per cut, because one broken piece is a lot of area.
Worked example: how many tiles do I need for a bedroom?
A customer wants 600 × 600 mm vitrified tiles for a 12 ft × 10 ft bedroom, laid straight, with 4-inch skirting. The example box holds 4 pieces (15.5 sq ft).
Floor
| Item | Calculation | Result |
|---|---|---|
| Floor area | 12 × 10 | 120 sq ft |
| Add 10% wastage | 120 × 1.10 | 132 sq ft |
| Tiles needed | 132 ÷ 3.875 = 34.06 | 35 tiles (always round up) |
Skirting
Skirting is usually cut from the same tile, or bought as ready strips. The calculation uses running feet:
- Perimeter = 2 × (12 + 10) = 44 ft. Deduct a 3 ft door = 41 running ft
- One 600 mm tile ≈ 1.97 ft long, so you need 41 ÷ 1.97 ≈ 20.8, which rounds up to 21 strips
- A 600 mm tile cut into 100 mm (about 4-inch) strips gives up to 6 strips in theory. Planning on 5 usable strips per tile allows for blade loss and breakage, so you need 21 ÷ 5 = 4.2, which rounds up to 5 tiles
Total
- 35 + 5 = 40 tiles
- 40 ÷ 4 per box = 10 boxes
Without wastage the floor alone works out to 7.74 boxes. Quote "8 boxes" and the job runs short.
Bathroom wall example
Take a 7 ft × 5 ft bathroom tiled to 7 ft height, with a 2.5 ft × 7 ft door, using 300 × 450 mm tiles at 8 pieces per box (example):
- Net wall area = 168 − 17.5 = 150.5 sq ft
- With 10% wastage = 165.55 sq ft
- 165.55 ÷ 11.63 = 14.24, so you quote 15 boxes
Bathroom floor tiles are a separate item. They are usually a different anti-skid tile, so calculate them as a separate line.
How to calculate tiles box quantity fast at the counter
When the shop is busy, use this short method:
- Area in sq ft × (1 + wastage %) = area to supply
- Area to supply ÷ coverage per box = boxes. Always round up
- Add skirting tiles separately
- Check stock of the same batch and shade for the full quantity before confirming
The last point matters more than the arithmetic. Two boxes from a different batch can look slightly different on the floor. Ideally the whole quantity goes in one dispatch, from one batch. Keep each shade or batch as its own item (or put the code in the item name), so the counter staff can see how many boxes of that exact lot are left. Size-wise stock is what inventory tracking is for.
Quoting customers without disputes
A good tile quotation shows the customer how you reached the number:
- Room-wise lines (bedroom floor, bathroom wall, bathroom floor, kitchen dado)
- Tile size, series and shade code
- Area, wastage % and number of boxes
- Rate per box or per sq ft. Pick one and say which on the quotation
- Skirting as a separate line
- Rate validity, and your policy on returning unopened boxes
Tiles are taxed at 18% GST (HSN 6907). For a mixed order that includes sanitaryware or adhesive, check each item's rate on our GST rates page. GST rates and rules change, so check the latest CBIC notification or ask your CA before filing.
Example quotation figure (illustrative rate, not a market price): 10 boxes at ₹900 per box = ₹9,000 taxable value. CGST 9% = ₹810, SGST 9% = ₹810, total ₹10,620.
If you want a general format for estimates, our guide on how to make a quotation covers it. In MaterialBill, a quotation or estimate can be converted into an invoice once the customer confirms, so the box count you calculated carries straight onto the bill.
Box vs sq ft billing
Many dealers price per sq ft but sell whole boxes. Set the box as the selling unit and record its sq ft coverage, so the bill can show both. Multi-unit billing handles this. If you sell loose pieces, bill them as pieces. Never round down a quantity, write your assumptions on the estimate, and allow more wastage for diagonal layouts.
Frequently asked questions
How many tiles do I need for a 10 × 10 room?
The room is 100 sq ft. With 10% wastage that becomes 110 sq ft. With 600 × 600 mm tiles (about 3.875 sq ft each) that is 110 ÷ 3.875 = 28.4, so 29 tiles. At 4 pieces per box (example), you need 8 boxes, plus skirting. Always check the box's actual coverage.
How much tile wastage should I add?
For a simple room with a straight layout, many dealers and masons add about 5–10%. Bathrooms, kitchens and diagonal or patterned layouts need more, often 10–15% or above. Follow the mason's advice for the specific job.
Should customers keep spare tiles?
Yes. A few spare tiles from the same batch make later repairs easy, because an exact shade match may be impossible after a few months. Part of the wastage allowance covers this.
Why does my box coverage differ from the catalogue?
Catalogues and box labels sometimes round off. Actual tile dimensions can also differ slightly from the nominal size. Use the figure printed on the box you are selling.
Should I bill tiles per box or per sq ft?
Either works, as long as the invoice is clear. Most shops sell whole boxes and may show the sq ft equivalent for the customer's understanding. Keep the unit consistent between the quotation and the invoice.
A careful tile calculation protects your margin and the customer's trust. If you want box-wise stock and quotations that turn into invoices in one place, you can start free with MaterialBill's tiles and marble billing software.